Compressed air is considered to be one of the best sources for powering up large equipment in industrial or construction-based settings. Large, industrial sized air compressor units take in large amounts of air and compress it down to a high pressure, expelling it through a pneumatic hose that goes into different tools in order to power them.

Due to the expensive nature of purchasing an industrial air compressor, it is important to do research and choose a model that works for you and your business. One of the first factors that need to be kept in mind is the amount of pressure, or PSI (pounds per square inch), that is produced by the unit. Every tool attached to the industrial air compressor requires a different PSI level, so be sure that the unit you pick out produces the necessary PSI for all your equipment.

CFM, or cubic feet per minute, is another important measurement that needs consideration. This measures the amount of air moving through the compressor unit. If you plan on having multiple tools run at the same time by the same unit, you will need a higher CFM in order to keep the PSI going to each tool at optimal level.

Aside from maintaining measurements and ensuring they are up to par, you will also need to take maintenance of the machine into account. One of the largest problems industrial air compressors face are condensates that form inside the system. In order to remove these condensates, a dryer is necessary, making the addition a key aspect to consider when purchasing a unit.

Another aspect of maintenance you should consider is the type of filter that will be used. Air filters remove airborne micro particles from the system such as water vapor, oil, dirt and other contaminants. Also, whether you prefer your unit to be run by either gas or electricity is another factor. Keep in mind gas-powered machines should only be used in well ventilated areas.

Be sure to take all of these considerations in mind when it comes to choosing the right industrial air compressor. Of course, purchase your unit from an established, credible air compressor dealer. Their expertise and knowledge can help you select the right system for your needs.

Just like with any type of specific specialization, compressed air and the tools and components surrounding the compressed air market carry a certain level of jargon that you might need to familiarize yourself with. Understanding what some of these terms means will give you a better understanding of what you are dealing with when it comes to compressed air.

One of the first things you are going to need to learn about are the different parts and components that are found in an industrial air compressor. The air regulator, for example, is used to gauge how much air is being expelled from the tank, which is the largest part of the industrial air compressor unit. The tank holds all the air until it is ready to be compressed and used by the connecting tools. On the tank, there is a pressure gauge which shows how much air is available to use inside the tank itself. There are check valves along the way to make sure that all the air is flowing in the same direction, and a line pressure gauge that measures how much air is in the pneumatic hoses that supplies all your tools with air.

Another set of terms you will need to learn is the difference between a single stage and a two-stage compressor unit. A single stage unit is a smaller machine that compresses air in one stage, hence the name. It can store a moderate amount of compressed air, but any large job is going to need a bigger unit. A two-stage compressor is a larger unit that compresses air in one stage, and then takes that compressed air and compresses it again in a second stage, leading to a much higher CFM and PSI.

After learning about some of the components of the unit itself, now you need to learn some of the measurements that are involved in reading all those gauges on your machine. One of the most important measurements is PSI, or pounds per square inch. This is the measurement of the pressure inside the tank, the hoses, and the system itself. It measures the amount of force being expelled by the machine, and many tools often have a PSI threshold in which your machine needs to produce a certain PSI in order for them to function properly.

Another measurement you need to familiarize yourself with is CFM, or cubic feet per minute. This measures the amount of air being delivered from the compressor to any of the connecting tools. A higher CFM rating means that more compressed air is getting to your tools, and if you want to run multiple tools from the same compressor machine, you are going to need one that produces a high CFM.

Whether you are looking for a small air compressor for your home use or on a much larger scale looking for industrial air compressor systems, then you will need to find out which type will best fit you. Air compressors differ in size and type and hence before you rush to buy one, you need to inquire about the model differences, advantages, and disadvantages.

You also need to know that air compressors need maintenance too. Many people view them just in terms of piping and the air compressor unit, but you have to know that it is much more than that. You should ensure that your air compressor is running smoothly and efficiently by subscribing for air audits. This service is provided by companies that are specialists in offering air compressor maintenance services.

It often helps to compare the costs of different brands before buying a particular product. One of the best and most trusted brands is Kaeser, but there are many other good names to choose from. Choosing a reputable brand will ensure that you do not incur too many extra maintenance costs due to premature product failure.

More so, you need to define what you need to use the air compressor for. If you are just looking for a residential application like filling the tires or spraying paint then you need an electric air compressor. The electric air compressor will definitely not be adequate for an industrial setting, but it has more than enough power to see you through various home jobs.

The other level of air compressors is the commercial level. They are actually not as portable as the electric counterparts, but they are definitely much more powerful than them. The commercial compressors come in wheels that makes them easy to push around, and, rather than the electric air compressors where you have to wait for air to recompress, these kind of compressors run for a longer time without needing a refill.

The industrial air compressors are quite similar to the commercial counterparts only that they tend to be much bigger in size. They are easier to maintain and they are quite inappropriate to use for simple purposes.

When looking for a good air compressor there are some factors that you need to consider such as the warranty. Good brands come with a longer warranty for the manufacturers tend to be confident of their products. You also need to do a little research on the internet and you will actually find great sites that offer great machines on a discount.

Purchasing a rebuilt air compressor is often an economical alternative to buying a new model. There are numerous advantages that are offered when a person wishes to buy a rebuilt compressor. However, there are also some disadvantages, and these should be weighed to ensure a person is content with their purchase. One of the first considerations for anyone in the market for an air compressor is the amount of air they need. This will affect the longevity of any machine,.

A rebuilt air compressor offers most of the same features that are found in new products, but it usually costs half the price of a new model. This is due to the fact that it has already been used. The chief disadvantage, to purchasing a product that has been rebuilt, is that it may not last as long as a new model. Efficiency may also be compromised, as rebuilt products may be based on older technologies. However, the higher expense of a new machine may often compensate for these issues. Most firms will also supply a limited warranty with a rebuilt air compressor, and this helps to eliminate any issues with the longevity of the machine.

Purchasing the proper air filters for your industrial air compressor is important to limit the damage to your rebuilt air system. Particulates such as scale, metal oxides and dirt can enter your compressed air system and cause damage to it. Liquids can also harm your air compressor through erosion if they are not properly filtrated. Chemical gases and microbes not only disrupt the efficiency of your air system, but they can also threaten the health and safety of your personnel. Buying a compressed air filter allows your system to have clean, dry air which improves the functionality of your compressed air system and protects it from harm, thus reducing maintenance costs and increasing finished product yield. Common types of air filters include compressor intake filters, compressor oil/air separators, coalescing filters, particulate filters, high particulate filters, and vapor filters.

Buying a rebuilt industrial air compressor has never been easier, and buyers have several options they can use to find the machine for their needs. The Internet has a host of different merchants that can offer a variety of machines. However, there are a host of industrial suppliers in most areas who can provide their clients with a rebuilt air compressor as well.

Many companies choose to take advantage of the benefits that are offered when they purchase a rebuilt industrial air compressor. These machines are more economical than new products and can offer the same benefits.

The location of where an air compressor will be installed is important because a good location will save you money, keep the compressor system more efficient and prevent problems from occurring. While you search for that perfect place for your air compressor, noise level should be considered. Air compressors can be loud enough to be a distraction to workers, which can affect work production and quality. Find a place where the sound will not be a problem for others.

Accessibility is also an important factor to consider when choosing the best location for your air compressor. Any room that the compressor is placed in or any enclosure that is built around it needs to be built in such a way that it allows for easy access to all parts of the compressor. The air compressor will likely be used often, and thus it will need to be checked out for monthly maintenance, so there should be sufficient room around the compressor. It should allow space for the air compressor to be removed from the room, should it be necessary. The selected area should be big enough for a person to maneuver around to perform maintenance and repairs.

Also, the air compressor needs room to breathe; it needs air space around it to keep cool. One should consider adding vents if the compressor is in a room. Something else to consider is the environment. The area must be cool and clean because the compressor generates heat. If the space is already hot on top of the heat being generated, it may create water-related problems and premature break downs.

Finally, you need to think about power requirements. The area should be prepped with equipment to ensure the compressor runs properly. A power supply should be nearby for AC-powered compressors. Batteries and/or an outlet should be nearby for DC-powered compressors. Air compressors running on gasoline, natural gas or diesel should have equipment near, not right next to, the compressor. Also, make sure that the space and equipment can handle the horsepower generated by the air compressor. Do not use it with outlets that are not safe or will cause lights to blink, as they drain electricity. Batteries should be checked to make sure they are not leaking. When using a gas or diesel compressor, make sure to read instructions carefully on how much gasoline or diesel to add and how high or low natural gas temperatures should be.

Industrial sized air compressors are an invaluable tool in the workplace. Many large pieces of machinery and tools will use compressed air to function, such as pneumatic drills, nail guns, and even jackhammers. Getting the most from your industrial air compressor means ensuring that it is running at its highest level of efficiency, which can be done through simple routine maintenance, repairs, and regular checks to keep it running in top shape.

Preventative maintenance goes a long way in keeping the shelf life of your industrial air compressor long, so here are some areas you should routinely check and maintain. One of the first things you can do is to check on your machine itself for its specifications, specifically the PSI, CFM, and pressure gauges located throughout the system. Once the specs for your unit have been determined, you can figure out the proper energy consumption with the use of a KWH meter. This will let you know the power level at which your machine is running and from there you can make alterations to the output of the system itself to lower energy costs.

A huge problem that can plague an industrial air compressor if not fixed immediately is leakage, from both the hoses and the machine itself. Most leaks can be heard, as compressed air streaming out of a leak will make a noticeable sound, so you should be able to pinpoint the leak. Regular thorough inspections will point out any leaks in the system before they become serious problems. On top of this, installing a flow meter on the main line can be useful in gaining additional information.

Once the leak has been found, it needs to be fixed immediately, because nothing kills the energy efficiency of an industrial air compressor like a leak does. Leaks can easily be fixed and repaired by standard means, and it helps your system if you have an isolation valve located in the main line. This will slow any leak and make it easier to find and fix.

Keeping tabs on the PSI and CFM of your system will also help increase the energy efficiency. If your tools need to run at a certain minimum PSI to work, make sure that the machine is compressing air to that pressure, but not causing excess amounts of pressure. The same goes true for the CFM reading, which measures the amount of total compressed air in the tank itself. Use only the minimum amount of CFM on your system for each individual job, otherwise you are going to be wasting energy.

Knowledge is key when it comes to dealing with compressed air solutions, so be sure to check out and talk to an established, credible air compressor dealer for all your maintenance needs.

Lubrication is important for industrial air compressors. Anyone who tries to operate an air compressor without proper lubrication will quickly find themselves replacing internal parts. There are many reasons why lubrication is important.

The lifespan of an industrial air compressor depends on the use of quality lubrication. Lubrication affects many parts of an air pump including the gears, pistons, and gearings. With proper lubrication, many parts will have a longer life because of reduced friction. Proper lubrication should also reduce the temperature inside the air compressor by conducting heat. A good lubricant can also remove the heat of compression and protect the internal parts from rust. Lubricants can reduce the cost of operating an industrial air compressor not only because it can reduce or eliminate repair costs due to wear and tear, but also because it can make your air compressor perform more efficiently, in a more energy-saving way.

It is important to use high quality synthetic fluids for lubrication. It may be enticing to buy lower quality products because they are cheaper, but they do not lubricate as well or hold up under harsh conditions. Higher quality lubrication provides the right amount of shielding to important parts without causing sludge, grime, and other build up to accumulate on the parts. In choosing a lubricant for your air compressor you should also take into consideration the kind of compressor in question. There are many different kinds of lubricants - diesters, polyglycol/ester coolants, polyol ester, polyalphaolefins, silicone oil, synthetic blend, and petroleum oil, to name a few – and the one you pick will most likely be dependent on the kind of compressor you have. If your compressor is still under warranty, use the designated lubricant that the manufacturer suggests. Adhering to the manufacturer’s maintenance intervals and using the original equipment manufacturer's parts are needed to comply with the warranty.

It is important to regularly change the lubricant in an air compressor, much like you would change the oil in a car. Because the lubricant is oil, it can sit in the air compressor and become old. If the oil is not changed frequently, it can lose its lubricating properties and turn into sludge on and hinder the compressor's performance. It can also lead to filter blockage and bearing failure. There are tools that diagnose the TAN (total acid number) in lubricant. Once the TAN is above recommended levels, it is time to change the oil. There are things you can do to preserve the lifespan of the lubricant, such as keeping filters clean and monitoring temperatures. At operating temperatures above 100 degrees Fahrenheit, typical compressor lubricants break down faster.

Lubrication is very important for industrial air compressors. By frequently changing the oil, you can save thousands of dollars in repair and maintenance. Be aware of the manufacturer’s specifications for types and grades of oil prior to changing.

Air compressor emergencies can be very serious, resulting in personal damage and the breakdown of equipment. It is crucial that anyone involved in the process of compressing air is trained and aware of potential dangers. If you are working in an area you are unfamiliar with while using an air compressor, then take some time to look around for potential hazards, ask the owner questions about what is in the area you will be working. When operating an air compressor, be sure to read the handbook before using it. Follow the instructions precisely as each unit can vary.

When compressing air, keep the air pressure at the manufacturer recommended level. Check the gauge regularly and ensure it is working as intended so that you do not get a false reading. When operating an industrial air compressor it is important to use a hose reel, especially if your company has multiple air tools. This helps keep the work place more organized and efficient, essentially preventing wear and tear on the hoses. Hose reels also function to prevent tripping hazards, avoid air leaks and increase the overall productivity for the staff.

Not only can air leaks present a safety hazard, but can also cost a company potentially thousands of dollars a year depending on the size and amount of leaks. Therefore, identifying them as quickly as possible is crucial. Some signs of an air leak are; hissing sounds, lack of air pressure, the gauge reading an amount that is not equal to the amount used, and/or lack of air flow.

When dealing with an air compressor malfunctions, it’s crucial to be aware of back-ups and rentals available to you. Using qualified staff or sub-contractors to conduct regular maintenance on the air compressor units, a scheduled walk through and inspection of all the involved equipment can prevent leaks, fires and help make the units more efficient. There are many different condensate management devices, including zero loss drains, timed automatic drains, and oil/water separators that can help you lengthen the service life of your air receivers and lubricants by removing condensate efficiently, and keep you in compliance with regulations regarding condensate disposal. Make sure that repair technicians are up to date on the latest aspects of repairing, rebuilding and maintaining a wide range of equipment.

A refrigerated air dryer is a device that is used to remove moisture from a compressed air system. If a compressed air system contains moisture, it can run through the hoses and into the equipment, causing damage to the equipment that will cost a lot in repairs. You will need to install a properly sized refrigerated air dryer that you can use with your compressed air system.

The air compressor inlet air filter on the compressed air system is the typical entry point for moisture. A standard air compressor will convert 7 cubic feet of air to 100 psig at 1 cubic foot. Any water vapor that is in the air is also compressed to this size.

Water that is contained in compressed air comes in different forms. This includes liquid water, a mist and a gas or vapor. A general purpose filter can be used with a compressed air system to remove almost all of the liquid water in the system. The remaining water that is in the form of a mist or vapor is removed by using a refrigerated air dryer.

The holding capacity of moisture in air will be reduced by 50 percent when the air temperature drops at 50 degree intervals. The use of a refrigerated air dryer prevents the contamination of equipment located downstream from the air compressor. Water contamination can cause moving parts to fail that may lead to costly repairs.

The use of an air-to-air heat exchanger is used first to cool the compressed air. The heat exchanger for a refrigerated air dryer condenses small amounts of moisture by pre-cooling incoming air. This air is then sent to an air-to-refrigerant exchanger and is cooled even further by using a liquid refrigerant. All of the remaining moisture is condensed into a liquid that is drained out of the system. Air is then heated inside the air-to-air heat exchanger to prevent sweating of the pipe of hose.

When looking for a refrigerated air dryer, an important factor to consider is the pressure dew point. The pressure dew point is the required temperature for water mist or vapor to condense into liquid. The type of pressure dew point class that is commonly used is a Class 4. A test of your equipment is required if a specific pressure dew point needs to be determined. This is needed to calculate your pressure dew point temperature requirements.

An industrial air compressor is a machine that is used to convert power into energy by pressurizing and compressing air, which is then released in quick bursts. There are numerous methods of air compression, divided into either positive displacement or negative displacement types.

Compressed air is commonly used in industrial settings as a form of power output. It is used in equipment ranging from pneumatic equipment to engines. Most warehouses have their own air compressors, to speed equipment repair. Mechanical devices can be attached to an extended hose, and the power of compressed air is utilized to drive nails, run rotary gadgets, and even power forklift engines. For industrial applications, a small commercial grade compressor will not cut it. An industrial shop is going to want an industrial sized air unit, with a large air tank and powerful compressor.

Unfortunately, top quality industrial sized air compressors can be quite pricy. This is where strategic thinking becomes important. Some businesses have the cash to afford huge and brand new models of industrial air compressors. An independent business will likely focus on economy, which would mean making do with smaller units or hunting down a used model.

Pre-owned, or used, air compressors are a great way to save money. Not only will you be able to purchase an air compressor at an affordable price, but you will also be able to get a quality piece of equipment. Used or pre-owned equipment can be less expensive because it has already depreciated in value or is no longer required by the original owner. However, this reduction in price does not translate to a reduction in quality. Most pre-owned industrial air compressors are in great shape, run smoothly, contain all the necessary parts, and operate efficiently. In fact, many of these pre-owned models are still under warranty, which reduces risk to the buyers.

Air compressors are not sensitive equipment, and it is still possible to find replacement parts for most models. Those made by a established reputable manufacturer can last for decades. Many used air compressor models will still operate to their original specifications. It is generally the accessories that need replacement or better maintenance. These accessory parts are easy to come across to replace some of the worn out, depreciated ones found on pre-owned industrial air compressors. Purchasing a pre-owned air compressor is a terrific way to save money on a great quality machine.