Filter
  • Why a Pre-Owned Industrial Air Compressor Might Be Better

    Compressed air is a great tool to use on any job, from outdoor construction work to indoor factory utility, compressed air can power virtually any tool you need. In order to get enough compressed air for those large, heavy pieces of machinery, you are going to need an industrial size air compressor. When it comes to buying an industrial air compressor for your business, many people would immediately shy away from buying a pre-owned model, but there are a few benefits to purchasing a pre-owned air compressor over a brand new one.

    One of the first, and probably most obvious, benefits of buying a pre-owned industrial air compressor over a brand new model is the cost of the unit itself. Brand new models can be quite pricey, and start-up businesses such as machine shops or even auto garages might not have the cash lying around to spring for a shiny new air compressor.

    A pre-owned air compressor system will carry the power and reliability of a large, industrial scale model but often at the cost of a smaller, more personal model. Not only does this save your business a good deal of money, but you get the same amount of power as if you sprang for that brand new model.

    It is a common misconception that just because a product is labeled “used” or “pre-owned” that it is automatically considered lesser quality. When it comes to industrial air compressor units, this is most certainly not the case. A worn out industrial air compressor will have notcable signs of wear, so these units should be avoided. However, most unites will not only run smoothly and efficiently, but if proper maintenance was taken on the unit, it will run as if it were brand new.

    Another selling point to buying a pre-owned air compressor unit is that often times the seller will still have the warranty in place on the unit, adding peace of mind when buying such a big piece of machinery. If, for whatever reason, the unit should break down, the warranty will cover any repair costs, so you do not have to worry about sinking a lot of money into a pre-owned machine.

    An industrial sized air compressor is not a deliate piece of equipment, and as such, it is hard to break it down to the point where it is completely useless. With this in mind, plus knowing about the warranty, history of the machine, and any wear and tear on it, will give you a better understanding of what you are getting when you buy a pre-owned model. This purchase can be the best investment you could make for your business, so be sure to be diligent when it comes to buying your industrial air compressor.

  • Reciprocating Air Compressors

    When one thinks of a reciprocating air compressor, they generally pull to mind the old portable compressors that were common tag a longs to power tools. The governor on these traditionally compressors was quite simplistic; they generally only had two main gears. These consisted of an idling gear where the compressor was on and running. There was also a high gear. This gear was engaged when the compressor was actually being used to power a tool or other accessory.

    Today's reciprocating air compressors are not too different from these earlier models, though their construction, longevity and other aspects have certainly improved with time. Reciprocating air compressors are also referred to as piston compressors. These units use a piston that moves in a vertical motion, and a crankshaft that moves the piston up and down. The motion of the pistons and the crankshaft are what provides the gaseous materials at a high rate of pressure.

    The reciprocating air compressor uses the pistons as the main components to compress the air. As the piston moves in an up and down vertical motion, the air is pushed into a compartment. As the amount of the air increases in the compartment, the pressure on the air builds up. The denser the air becomes, the greater the pressure. When the correct pressure is reached, then it is ready for use.

    Compressors are used in a large variety of applications. Oil refineries, factories, and machine shops all have a use for air compressors. For those looking to purchase a compressor, there are a few factors to consider. The first thing that must be determined is how many cubic feet per minute you need for the application you intend to use the compressor for. After this has been determined, then you can start shopping for the ideal air compressor.

    There are a variety of reciprocating air compressors to choose from. The air tank size and the number and size of the cylinders are two things that offer a number of different options. Do you need a more portable compressor, or is a larger stand-alone compressor more suited to the environment in which you will be working?. There are also multi-stage units available on the market. These offer multiple cylinders that can compress the air to an even higher density than the single cylinder units.

  • Customized Air Compressors

    Customized air compressors have a number of useful benefits and are used every day by a variety of businesses. The majority of air compressors are very durable and can easily be transported.

    There are a variety of types of customized air compressors that are used for a variety of useful purposes. Types of air compressors include industrial, portable, dental, electric, and gas as well as diesel air. Customized air compressors vary in price and they can be purchased new or used.

    The way in which air compressors work are that they release pressurized air which then can be used in various industries, including industrial manufacturing and processes that make products used every day.
    Some of the different types of air compressors are reciprocating, rotary screw, and rotary centrifugal. Air compressors are either positive air placement or dynamic type machines, meaning that they automatically increase air pressure, as well as, elevate the air to a higher pressure.

    Most rotary air compressors are comprised of two rotors within a casting device which compresses the air internally. They employ a rotary type positive expulsion system, which conveys pressurized air to power drills, pumps and other types of machinery. There are no valves built within this type of compressor, it is oil cooled.

    Dynamic air compressors produce high pressure by the conversion of angular momentum imported by a rotating impeller device. This impeller device must be checked on a regular basis to make sure it is functioning at a normal capacity. Air compressors of this type are also created for a high capacity because the flow through the compression chain or device is continual. These types of compressors are built oil free and very easy to operate as well as maintain.

    Air compressors are designed for industrial use, contractors and commercial applications. In addition, air compressors are designed as portable, electric air as well as gas air compressors.

    Clients may actually view, as well as, purchase air compressors on line. The Internet gives the client the ability to shop by style, size, CFM as well as price. Customized air compressors are also available.

    Air compressors are used everyday in many different industries and applications. Prices on these machine vary according to brand and type.

  • Rotary Screw Compressors

    Rotary screw compressors are just one of a variety of air compressors. They employ a rotary type positive expulsion system, which conveys pressurized air to power drills, pumps and other types of machinery. Rotary screw compressors, also known as positive displacement compressors, deliver a determinate amount of highly pressurized air.

    Rotary screw compressors contain the following components, all enclosed in a sealed case: the compressor unit, systems that maintain proper lubrication, proper temperature control, proper capacity control and the system that cleans the discharged air. Inside of the compressor unit itself there are two interlocking corkscrew-shaped augers or rotors. Each auger or screw has a wide end and a narrow end. The wide end of the screw is the inlet that allows free air to flow into the screw housing upon demand, helped along by the partial vacuum caused by the screws rotating inside the housing.
    The air and oil combination flows downward from the wide ends to the narrow ends of the screw. This increases the vacuum, pulling more air into the housing. As the mixture is pulled downward through the grooves of the auger, the space where the air was narrows. At the narrow end of the screw, a valve tunnels the condensed air and oil into a separator, removing as much oil as possible from the condensed air. It is then released into the compressor receiver.

    Rotary screw compressors are available in oil cooled and oil free. When comparing the oil cooled model to the oil free model, the procedure for compressing the air is basically the same, although the medium in which the procedure is carried out is different. One is performed in an oil filled chamber which provides coolant and sealant properties. The byproducts of the oil filled units are gas and oil instead of air and oil, which are the byproducts of the oil free systems. Oil free rotary screw compressors work the same except that in the absence of the oil the process does create higher temperatures and it is less energy efficient.

    When choosing a rotary screw air compressor there are some important things to remember and take into consideration. What type of project are you working on? Does your compressor need to be transportable? Do you want oil cooled or oil free? Many consumers report that rotary screw compressors are easy to maintain and have a long life. They are known for their above average production abilities in a small package.

  • Two-stage versus Single-stage Air Compressors

    Using compressed air as an efficient kinetic energy resource requires a simple machine and holding tank. All compressors will have the same basic parts: receiving tank, pressure gauge and compression machinery. The identifying difference between two-stage and single-stage compressors is the number of compression cylinders incorporated.

    Single-stage air compressors follow a few simple principles. When the compressor’s piston is actuated it literally squeezes the air contained inside its cylinder until the PSI is strong enough to release a one-way valve connection between the cylinder and the receiving tank. As the piston cycles, the receiving tank is filled with compressed air. A pressure switch is located on the receiving tank to regulate the tank's maximum PSI with a mechanical relief valve attached for safety purposes. When the set maximum air pressure is achieved in the tank, a switch connected to the pressure switch will signal the motor to turn off. The pressure inside the receiving tank is continually monitored by the pressure gauge. When the PSI in the receiving tank drops below a preset level, the pressure switch will activate the motor to add more compressed air to restore the overall pressure of the receiver.

    A two-stage air compressor follows the exact same principles as the single-stage but there are two actuating pistons. The first stage will produce compressed air at a lower pressure than is ultimately desired for the end use. As the pressure in the first receiving stage builds it supplies air to the second stage's cylinder. The air is again compacted before being released into the output receiving tank. The advantage of a two-stage compressor is that it distributes the work load between two components to achieve a higher level of compressed air without having to overwork a single piston. The higher PSI offerings of two-stage compressors make them the better choice for industrial use and high torque pneumatic tools.

    A single-stage compressor is a highly efficient machine. Choosing an oil-less type will ensure long use with little maintenance required. The disadvantage to a single stage compressor is that its output is limited to providing air below 125 PSI.

    Two-stage compressors require slightly more maintenance because they have more parts. The advantage is that greater PSI offerings can be efficiently maintained without over-exerting the machine. Two-stage compressors also generate less heat than single-stage compressors do, which means that parts may not wear out as quickly and your compressor will likely have a longer life.